Parkjets

#1 in Free RC Parkjet Plans

F-15 Eagle

0.00
f-15+parkjet+jr4.jpg
f-15+parkjet+jr3.jpg
f-15+parkjet+jr2.jpg
f-15+parkjet+jr.jpg

F-15 Eagle

0.00

Designed by Jamie Rothwell

If you download plans and build the F-15, please consider sending the designer a donation for all of his hard work and inspiration!  Keep the plans coming by supporting his hard work!

PayPal | jamie.rothwell@yahoo.com

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

Following up on my Alpha Jet, this is my mid-motor mounted F-15 with some thrust vectoring properties built right into the design.  The plane is very smooth and flies very well inverted (see video).

One great benefit of this design is that it only requires two servos and elevons only.  A great plane with a simple set-up but with a lot of flexibility. The entire airframe can be constructed with 1.5 sheets of depron and one carbon support for the wings.  

For more information and video, check out my website.  Thanks!

SPECIFICATIONS

Length: 913mm | Width: 711mm | Weight: 14oz-18oz | Center of Gravity: Noted on Plans | 2200-2700kv Brushless Outrunner | 6 x 4e Prop | 30amp ESC | 2 x 12gram Servos | 1000-2200mAh 3S Lipo Battery

More Info

Add To Cart

Designed by Jamie Rothwell

If you download plans and build the F-15, please consider sending the designer a donation for all of his hard work and inspiration!  Keep the plans coming by supporting his hard work!

PayPal | jamie.rothwell@yahoo.com

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

Following up on my Alpha Jet, this is my mid-motor mounted F-15 with some thrust vectoring properties built right into the design.  The plane is very smooth and flies very well inverted (see video).

One great benefit of this design is that it only requires two servos and elevons only.  A great plane with a simple set-up but with a lot of flexibility. The entire airframe can be constructed with 1.5 sheets of depron and one carbon support for the wings.  

For more information and video, check out my website.  Thanks!

SPECIFICATIONS

Length: 913mm | Width: 711mm | Weight: 14oz-18oz | Center of Gravity: Noted on Plans | 2200-2700kv Brushless Outrunner | 6 x 4e Prop | 30amp ESC | 2 x 12gram Servos | 1000-2200mAh 3S Lipo Battery