Parkjets

#1 in Free RC Parkjet Plans

F4F Wildcat

0.00
sam_1347.jpg
sam_1351.jpg
sam_1348.jpg
sam_1350.jpg
sam_1353.jpg
sam_1352.jpg

F4F Wildcat

0.00

Designed by Jamie Rothwell

If you download plans and build the F4F Wildcat, please consider sending the designer a donation for all of his hard work and inspiration!  Keep the plans coming by supporting his hard work!

PayPal | jamie.rothwell@yahoo.com

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

Following up on my  F-15 and Alpha Jet, this is my take on the F4F Wildcat. The semi-scale design incorporates some of my score and fold techniques to achieve the trademark large nose of the F4F.  A great flyer that can take several different power set ups and battery configurations, as outlined in the video below. This design also lends itself to a great 3D Flyer.  

The entire aircraft was designed to be built out of one piece of foam, using one carbon spar.

For more information and video, check out my website.  Thanks!

SPECIFICATIONS

Length: 637mm | Width: 947mm | Weight: 14oz-18oz | Center of Gravity: Noted on Plans | 1000-1600kv Brushless Outrunner | Match Motor | 20amp ESC | 4 x 9 gram Servos | 1000-1800mAh 3S Lipo Battery

 

More Info

Add To Cart

Designed by Jamie Rothwell

If you download plans and build the F4F Wildcat, please consider sending the designer a donation for all of his hard work and inspiration!  Keep the plans coming by supporting his hard work!

PayPal | jamie.rothwell@yahoo.com

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

Following up on my  F-15 and Alpha Jet, this is my take on the F4F Wildcat. The semi-scale design incorporates some of my score and fold techniques to achieve the trademark large nose of the F4F.  A great flyer that can take several different power set ups and battery configurations, as outlined in the video below. This design also lends itself to a great 3D Flyer.  

The entire aircraft was designed to be built out of one piece of foam, using one carbon spar.

For more information and video, check out my website.  Thanks!

SPECIFICATIONS

Length: 637mm | Width: 947mm | Weight: 14oz-18oz | Center of Gravity: Noted on Plans | 1000-1600kv Brushless Outrunner | Match Motor | 20amp ESC | 4 x 9 gram Servos | 1000-1800mAh 3S Lipo Battery