Parkjets

#1 in Free RC Parkjet Plans

FA-209 Saber Tooth Tiger

0.00
dsc02602.jpg
dsc02604.jpg
dsc02512-2.jpg
dsc02603.jpg

FA-209 Saber Tooth Tiger

0.00

Designed by Eduardo Flores

If you download plans and build the FA-209 Saber Tooth Tiger, please consider sending the designer a donation for all of his hard work and inspiration! Keep the plans coming by supporting his hard work!

PayPal | eefm_lalo@yahoo.com

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

Here is my design for what I call the FA-209 Saber Tooth Tiger. This plane has excellent stability at slow speed, unlike other EDF jets. This design is very easy to build and has very good speed due to the low weight and high thrust. The flying weight is about 385 grams and with a modest set-up, you can get 525 grams of thrust on a single edf 64.  Needless to say, it has no problem going up! 

I designed the Saber Tooth for EDF, but I have also adapted the design for a pusher prop setup. I included the motor mount the plans just in case you prefer a prop. I highly recommended this for anyone, from beginners to experts. This one can be a tough plane to crash!

Just print the zip files in normal sheets in its original size and most of all, enjoy it!

Be sure to check out my YouTube Channel and subscribe.

SPECIFICATIONS

Length: 31" | Width: 28" | Weight: 385 grams | Center of Gravity: Noted on Plans | Turnigy T2632-3400 | 64mm GWS 6 blade impeller | 20amp ESC | Three, 8 gram servos | 850mAh 4S Lipo Battery with 45-90C for EDF; 800 mAh 3S for prop set-up

More Info

Add To Cart

Designed by Eduardo Flores

If you download plans and build the FA-209 Saber Tooth Tiger, please consider sending the designer a donation for all of his hard work and inspiration! Keep the plans coming by supporting his hard work!

PayPal | eefm_lalo@yahoo.com

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

Here is my design for what I call the FA-209 Saber Tooth Tiger. This plane has excellent stability at slow speed, unlike other EDF jets. This design is very easy to build and has very good speed due to the low weight and high thrust. The flying weight is about 385 grams and with a modest set-up, you can get 525 grams of thrust on a single edf 64.  Needless to say, it has no problem going up! 

I designed the Saber Tooth for EDF, but I have also adapted the design for a pusher prop setup. I included the motor mount the plans just in case you prefer a prop. I highly recommended this for anyone, from beginners to experts. This one can be a tough plane to crash!

Just print the zip files in normal sheets in its original size and most of all, enjoy it!

Be sure to check out my YouTube Channel and subscribe.

SPECIFICATIONS

Length: 31" | Width: 28" | Weight: 385 grams | Center of Gravity: Noted on Plans | Turnigy T2632-3400 | 64mm GWS 6 blade impeller | 20amp ESC | Three, 8 gram servos | 850mAh 4S Lipo Battery with 45-90C for EDF; 800 mAh 3S for prop set-up