Parkjets

#1 in RC Parkjet Plans

SA-43 Hammerhead

$0.00
pobrana+klatka+179.jpg
imgp9406-3.jpg
imgp9392-2.jpg
imgp9385-2.jpg

SA-43 Hammerhead

$0.00

Designed by Robertus

If you download plans and build the Hammerhead, please consider sending the designer a donation for all of his hard work and inspiration!  Keep the plans coming by supporting his hard work!

PayPal | rh@netpak.pl

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

SA-43 Hammerhead it was my first big project. I imagined the Hammerhad as soon as I've learned to fly RC models. I built it without a plans, drawing everything directly on the foam. The plans were created later. 

SA-43 has a very unusual appearance with canards, pusher drive, but the most conspicuous is negative dihedral and the forward swept wings. It makes the Hammerhead look very aggressive. CoG is in front of leading edge, so keep eye on weight when you build the wings, but the construction should be not cause problems.

And "One more thing . . . It's okay to be scared."(T.C.McQuenn)

Be sure to check out my YouTube Channel and subscribe for new videos!

SPECIFICATIONS

Length: 81cm | Wingspan: 90cm | AOW: 580g | Center of Gravity: 1cm in front of leading edge (see build thread) | Engine Emax cf2812 |7x4 APC propeller| 30amp ESC | Two, 9 gram servos | 1300mAh 30C Lipo 11.1 Battery

BUILD THREAD

RC GROUPS BUILD THREAD

More Info

Add To Cart

Designed by Robertus

If you download plans and build the Hammerhead, please consider sending the designer a donation for all of his hard work and inspiration!  Keep the plans coming by supporting his hard work!

PayPal | rh@netpak.pl

Suggested Donation: $10.00

NOTES FROM THE DESIGNER

SA-43 Hammerhead it was my first big project. I imagined the Hammerhad as soon as I've learned to fly RC models. I built it without a plans, drawing everything directly on the foam. The plans were created later. 

SA-43 has a very unusual appearance with canards, pusher drive, but the most conspicuous is negative dihedral and the forward swept wings. It makes the Hammerhead look very aggressive. CoG is in front of leading edge, so keep eye on weight when you build the wings, but the construction should be not cause problems.

And "One more thing . . . It's okay to be scared."(T.C.McQuenn)

Be sure to check out my YouTube Channel and subscribe for new videos!

SPECIFICATIONS

Length: 81cm | Wingspan: 90cm | AOW: 580g | Center of Gravity: 1cm in front of leading edge (see build thread) | Engine Emax cf2812 |7x4 APC propeller| 30amp ESC | Two, 9 gram servos | 1300mAh 30C Lipo 11.1 Battery

BUILD THREAD

RC GROUPS BUILD THREAD