Parkjets

#1 in Free RC Parkjet Plans

SU-31

0.00
3765412577_696331a234_b.jpg
3766199154_494211cb7d_b.jpg
3766212474_d2b4a01613_b.jpg
3766210726_8c9b205253_b.jpg
3765407201_9cb65b16d8_b.jpg

SU-31

0.00

Designed by Tomas Hellberg

If you download plans and build the SU-31, please consider sending the designer a donation for all of his hard work and inspiration!

PayPal | tomas@hellberg.name

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

These are my plans for a simple profile SU-31 3D aerobatic model.  This design features easy tabbed construction so it goes together quickly.  This airplane is designed to be made out of 6mm Depron foam but lots of materials will work, you might just have to adjust the tabs.  

Additionally, the slots for the motor mount may have to be adjusted, depending on which motor you choose to use.

I designed this model a little larger than my other models, so its certainly best flown outdoors.  Also, the use of carbon rods and supports is recommended.  

SPECIFICATIONS

Wing span: 105 cm (41 inches) | Length: 98 cm (39 inches) | CoG location: 5.7 cm (2.2 inches) behind wing leading edge.

BUILD THREAD

 

For more information, visit Tomas Hellberg's website.

Add To Cart

Designed by Tomas Hellberg

If you download plans and build the SU-31, please consider sending the designer a donation for all of his hard work and inspiration!

PayPal | tomas@hellberg.name

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

These are my plans for a simple profile SU-31 3D aerobatic model.  This design features easy tabbed construction so it goes together quickly.  This airplane is designed to be made out of 6mm Depron foam but lots of materials will work, you might just have to adjust the tabs.  

Additionally, the slots for the motor mount may have to be adjusted, depending on which motor you choose to use.

I designed this model a little larger than my other models, so its certainly best flown outdoors.  Also, the use of carbon rods and supports is recommended.  

SPECIFICATIONS

Wing span: 105 cm (41 inches) | Length: 98 cm (39 inches) | CoG location: 5.7 cm (2.2 inches) behind wing leading edge.

BUILD THREAD

 

For more information, visit Tomas Hellberg's website.