Designed by Nick Cara
If you download free RC airplane plans and build the YF-23, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | email@example.com
Suggested Donation: $10.00
Here is my Easybuild RC version of the Northrop YF-23 Black Widow II.
It has a mid-mounted motor, electronics and battery are accessible via an access door underneath.
It is built from 6mm Depron foam, held together with hot glue. I only use Epoxy for the carbon rods.
Use just two servos to control all surfaces but you could use a third for separate elevator (V1.04).
Both 100% and 70% plans are provided along with decals.
The full size plans will also allow for the use of the "Power Pod", which is used on several of my other designs.
YF-23 Black Widow II - EASYBUILD | Depron = 6mm | Wing span = 72cm (28") | Length = 110cm (43")
SETUP: Weight (painted) = TBA | Weight (painted and with 1350 battery) = TBA | Static thrust = 650g | Prop = 6x4 | Motor = 2000kv | ESC = 25A minimum | Battery = 1350mAh 3s1p 25C Li-Po | Elevon throw = +/- 25 degrees | Expo = 40% | COG = 17 from wing break
NO VIDEO AVAILABLE
Zip file contains full size plans, 70% plans, tiled and non-tiled and decals in PDF form
Copyright © 2012, Parkjets.com. All rights reserved.
If you are viewing this site in Internet Explorer 6, please get a different browser.