- Parkjet Plans
- Concorde SST
Concorde SST
Concorde SST
Designed by Pat Gagnon
If you download airplane plans and build the Concorde SST, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | pat@nicohobbies.com
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
The design took all of 2 afternoons, and I had a flyable prototype in 7 days. The initial flight was quite hairy as I had the CG way too far back. I moved the battery forward, and I found the proper CG location and it flies nice!
CG wound up being 4" in front of the forward opening of the prop canyon.
RECOMMENDED GEAR
Motor - 2212-6 2200kv outrunner | ESC - Generic 30A | Prop - APC 6X4E | Servos - 2x HXT900 9-gram micro servos | Battery - Hyperion G3 3S 1300mAh 25C | RX - XPS Nano-E 6-ch
SPECIFICATIONS
Weight: 14oz | Length: 49" | Wingspan: 21" | Center of Gravity: 4" in front of the forward opening of the prop canyon
BUILD THREAD
Designed by Pat Gagnon
If you download airplane plans and build the Concorde SST, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | pat@nicohobbies.com
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
The design took all of 2 afternoons, and I had a flyable prototype in 7 days. The initial flight was quite hairy as I had the CG way too far back. I moved the battery forward, and I found the proper CG location and it flies nice!
CG wound up being 4" in front of the forward opening of the prop canyon.
RECOMMENDED GEAR
Motor - 2212-6 2200kv outrunner | ESC - Generic 30A | Prop - APC 6X4E | Servos - 2x HXT900 9-gram micro servos | Battery - Hyperion G3 3S 1300mAh 25C | RX - XPS Nano-E 6-ch
SPECIFICATIONS
Weight: 14oz | Length: 49" | Wingspan: 21" | Center of Gravity: 4" in front of the forward opening of the prop canyon