Parkjets

#1 in Free RC Parkjet Plans

F-14 Tomcat MDC

0.00
20120304_0087.jpg
img_3243.jpg
img-20111020-00894.jpg
img-20111020-00888.jpg
img_3240.jpg
dscn0214.jpg
221120111740.jpg
20120304_0088.jpg
dscn0208.jpg

F-14 Tomcat MDC

0.00

Designed by Maybz

If you download airplane plans and build the MDC F-14 Tomcat, please consider sending the designer a donation for all of his hard work and inspiration! 

PayPal | Coming Soon

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

Here's a new design I did for a simple profile F-14 with swing wings. The idea was to come up with a relatively simple swing-wing design that looked as close to scale as possible without the need for sanding or laser-cut wood parts. Everything is made from 6mm Depron except for a few pieces of 1/16 ply which are used for the control horns and motor mount and a few pieces of .035x.236 carbon strip for the spars. I cut and built mine in one evening and was flying the next day.

RECOMMENDED GEAR

2212-06 Outrunner| 30Amp ESC | 3s 2100mah Lipo | 6 x 4 Prop | 2 HS-55 Servos plus 1 HS-65 Metal Gear or similar for the wing sweep.

SPECIFICATIONS

CG is right at the Carbon center section stiffener.

BUILD THREAD

RC GROUPS BUILD THREAD

Construction guide online.

More Info

Add To Cart

Designed by Maybz

If you download airplane plans and build the MDC F-14 Tomcat, please consider sending the designer a donation for all of his hard work and inspiration! 

PayPal | Coming Soon

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

Here's a new design I did for a simple profile F-14 with swing wings. The idea was to come up with a relatively simple swing-wing design that looked as close to scale as possible without the need for sanding or laser-cut wood parts. Everything is made from 6mm Depron except for a few pieces of 1/16 ply which are used for the control horns and motor mount and a few pieces of .035x.236 carbon strip for the spars. I cut and built mine in one evening and was flying the next day.

RECOMMENDED GEAR

2212-06 Outrunner| 30Amp ESC | 3s 2100mah Lipo | 6 x 4 Prop | 2 HS-55 Servos plus 1 HS-65 Metal Gear or similar for the wing sweep.

SPECIFICATIONS

CG is right at the Carbon center section stiffener.

BUILD THREAD

RC GROUPS BUILD THREAD

Construction guide online.