- Parkjet Plans
- F-14 Tomcat MDC
F-14 Tomcat MDC
F-14 Tomcat MDC
Designed by Maybz
If you download airplane plans and build the MDC F-14 Tomcat, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | Coming Soon
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
Here's a new design I did for a simple profile F-14 with swing wings. The idea was to come up with a relatively simple swing-wing design that looked as close to scale as possible without the need for sanding or laser-cut wood parts. Everything is made from 6mm Depron except for a few pieces of 1/16 ply which are used for the control horns and motor mount and a few pieces of .035x.236 carbon strip for the spars. I cut and built mine in one evening and was flying the next day.
RECOMMENDED GEAR
2212-06 Outrunner| 30Amp ESC | 3s 2100mah Lipo | 6 x 4 Prop | 2 HS-55 Servos plus 1 HS-65 Metal Gear or similar for the wing sweep.
SPECIFICATIONS
CG is right at the Carbon center section stiffener.
BUILD THREAD
Construction guide online.
Designed by Maybz
If you download airplane plans and build the MDC F-14 Tomcat, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | Coming Soon
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
Here's a new design I did for a simple profile F-14 with swing wings. The idea was to come up with a relatively simple swing-wing design that looked as close to scale as possible without the need for sanding or laser-cut wood parts. Everything is made from 6mm Depron except for a few pieces of 1/16 ply which are used for the control horns and motor mount and a few pieces of .035x.236 carbon strip for the spars. I cut and built mine in one evening and was flying the next day.
RECOMMENDED GEAR
2212-06 Outrunner| 30Amp ESC | 3s 2100mah Lipo | 6 x 4 Prop | 2 HS-55 Servos plus 1 HS-65 Metal Gear or similar for the wing sweep.
SPECIFICATIONS
CG is right at the Carbon center section stiffener.
BUILD THREAD
Construction guide online.