Parkjets

#1 in RC Parkjet Plans

Starfighter

$0.00
2012-03-17_17-41-12_141.jpg
2012-03-17_17-40-59_448.jpg
2012-03-17_17-41-17_471.jpg

Starfighter

$0.00

Designed by Dennis Schmalzel

If you download RC plans and build the Buck Rogers Starfighter, please consider sending the designer a donation for all of his hard work and inspiration!

PayPal | dschmalzel@comcast.net

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

Adding to the number of designs, I looked to recreate the awesome looking Starfighter from the TV Series "Buck Rogers."  This park flyer is easy to assemble and is a pretty good flyer, not the best out there, but it certainly gets the job done.  The way the Starfighter is designed, several 2mm carbon rods are needed to help with strength and to avoid breaking off parts on landing.    

If you are looking for a simple weekend project that looks great with just some sharpie markers and some short build times, plus no one will have it at the flying field, give the Starfighter a try. Also, I have lots of other information on other designs on my website!

SPECIFICATIONS

Weight: 12-14oz | Length: 40" | Width: 24" | Towerpro 2408-21 Brushless outrunner (or similar power) | 18amp ESC | Servos: 2 x 9 gram servos Battery: 1300-1800 11.1v 3s 20 C lithium polymer | COG: at the front edge of the prop slot

BUILD THREAD

RC GROUPS BUILD THREAD

KIT AVAILABLE

CHECK THROUGH THE DESIGNER

More Info

Add To Cart

Designed by Dennis Schmalzel

If you download RC plans and build the Buck Rogers Starfighter, please consider sending the designer a donation for all of his hard work and inspiration!

PayPal | dschmalzel@comcast.net

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

Adding to the number of designs, I looked to recreate the awesome looking Starfighter from the TV Series "Buck Rogers."  This park flyer is easy to assemble and is a pretty good flyer, not the best out there, but it certainly gets the job done.  The way the Starfighter is designed, several 2mm carbon rods are needed to help with strength and to avoid breaking off parts on landing.    

If you are looking for a simple weekend project that looks great with just some sharpie markers and some short build times, plus no one will have it at the flying field, give the Starfighter a try. Also, I have lots of other information on other designs on my website!

SPECIFICATIONS

Weight: 12-14oz | Length: 40" | Width: 24" | Towerpro 2408-21 Brushless outrunner (or similar power) | 18amp ESC | Servos: 2 x 9 gram servos Battery: 1300-1800 11.1v 3s 20 C lithium polymer | COG: at the front edge of the prop slot

BUILD THREAD

RC GROUPS BUILD THREAD

KIT AVAILABLE

CHECK THROUGH THE DESIGNER