Parkjets

#1 in Free RC Parkjet Plans

Eurofighter

0.00
33.jpg
37.jpg
32.jpg
39.jpg
24.jpg

Eurofighter

0.00

Designed by Tomas Hellberg

If you download plans and build the Eurofighter, please consider sending the designer a donation for all of his hard work and inspiration!

PayPal | tomas@hellberg.name

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

The Eurofighter Typhoon is a mid-mounted pusher model. It is intended to be flown with tailerons only, but I've also made markings for a rudder. Build it from the plans attached below.

You will have to mark out and cut the slot for the motor. The dimensions of the slots and tabs are made for 6 mm depron.

SPECIFICATIONS

Wing span: 73 cm (29 inches) | Length: 101 cm (40 inches) | CoG location: 12 cm (4.75 inches) from wingbreak | Propeller slot: Fits propellers with a maximum diameter of 6 inches.

BUILD THREAD

RC GROUPS BUILD THREAD

KIT AVAILABLE

6MMFLYRC.COM

For more information, visit Tomas Hellberg's website.

More Info

Add To Cart

Designed by Tomas Hellberg

If you download plans and build the Eurofighter, please consider sending the designer a donation for all of his hard work and inspiration!

PayPal | tomas@hellberg.name

Suggested Donation: $10.00

NOTE FROM THE DESIGNER

The Eurofighter Typhoon is a mid-mounted pusher model. It is intended to be flown with tailerons only, but I've also made markings for a rudder. Build it from the plans attached below.

You will have to mark out and cut the slot for the motor. The dimensions of the slots and tabs are made for 6 mm depron.

SPECIFICATIONS

Wing span: 73 cm (29 inches) | Length: 101 cm (40 inches) | CoG location: 12 cm (4.75 inches) from wingbreak | Propeller slot: Fits propellers with a maximum diameter of 6 inches.

BUILD THREAD

RC GROUPS BUILD THREAD

KIT AVAILABLE

6MMFLYRC.COM

For more information, visit Tomas Hellberg's website.