- Parkjet Plans
- Voyager
Voyager
Voyager
Designed by Dennis Schmalzel
If you download the free RC plans and build the Voyager, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | dschmalzel@comcast.net
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
This is a pretty big plane - 40" Long
The Voyager is a great flying RC airplane with very gentle handling and a pretty wide speed range. It is a 3 channel system with Aileron, Elevator and Throttle so any 3 channel or higher radio will work. It is fully aerobatic and with the recommended power system it can go vertical right into space!
RECOMMENDED GEAR
Motor: Towerpro 2408-21 Brushless Motor | ESC: 18 amp or larger | Servos: Hextronic 9g and 5g servos (1 of each) | Battery: 1300 – 1800 mah 11.1v 3s 20c Lithium Polymer battery | Radio: 3 Channel with Elevon Mixing
SPECIFICATIONS
Weight: 14oz | Length: 40" | Saucer Width: 15" | Center of Gravity: On the front of the center of the prop slot or forward a little.
BUILD THREAD
KIT AVAILABLE
Designed by Dennis Schmalzel
If you download the free RC plans and build the Voyager, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | dschmalzel@comcast.net
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
This is a pretty big plane - 40" Long
The Voyager is a great flying RC airplane with very gentle handling and a pretty wide speed range. It is a 3 channel system with Aileron, Elevator and Throttle so any 3 channel or higher radio will work. It is fully aerobatic and with the recommended power system it can go vertical right into space!
RECOMMENDED GEAR
Motor: Towerpro 2408-21 Brushless Motor | ESC: 18 amp or larger | Servos: Hextronic 9g and 5g servos (1 of each) | Battery: 1300 – 1800 mah 11.1v 3s 20c Lithium Polymer battery | Radio: 3 Channel with Elevon Mixing
SPECIFICATIONS
Weight: 14oz | Length: 40" | Saucer Width: 15" | Center of Gravity: On the front of the center of the prop slot or forward a little.