Designed by Tomas Hellberg
If you download plans and build the F-22, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
NOTES FROM THE DESIGNER
The F-22 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below.
The dimensions of the slots and tabs are made for 6 mm depron.
SPECIFICATIONS
Wing span 72.1 cm (28.4 inches) | Length 99.9 cm (39.3 in) | CoG location 8.25 cm (3.25 inches) back from the front of the main wing | Propeller slot Fits propellers with a maximum diameter of 6 inches
WHAT YOU NEED TO BUILD THIS
BUILD THREAD
RC GROUPS BUILD THREAD
Visit Tomas Hellberg's website for more information.
Designed by Tomas Hellberg
If you download plans and build the F-22, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
NOTES FROM THE DESIGNER
The F-22 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below.
The dimensions of the slots and tabs are made for 6 mm depron.
SPECIFICATIONS
Wing span 72.1 cm (28.4 inches) | Length 99.9 cm (39.3 in) | CoG location 8.25 cm (3.25 inches) back from the front of the main wing | Propeller slot Fits propellers with a maximum diameter of 6 inches
WHAT YOU NEED TO BUILD THIS
BUILD THREAD
RC GROUPS BUILD THREAD
Visit Tomas Hellberg's website for more information.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5