Designed by Tomas Hellberg
If you download plans and build the F-18E, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
The F/A-18 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below, or buy it as a kit, with or without motor and ESC, from 6mmFlyRC. You can also buy it from Grayson Hobby with a power combo set (motor, ESC and propeller).
The dimensions of the slots and tabs are made for 6 mm depron
Wing span: 73.5 cm (28.9 inches), 71.9 cm without wingtips (28.3 inches) | Length 102.5 cm (40.4 inches) | CoG location 14.6 cm (5.75 inches) forward of the vertical stabilizers | Fits propellers with a maximum diameter of 6 inches
Designed by Tomas Hellberg
If you download plans and build the F-18E, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
The F/A-18 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below, or buy it as a kit, with or without motor and ESC, from 6mmFlyRC. You can also buy it from Grayson Hobby with a power combo set (motor, ESC and propeller).
The dimensions of the slots and tabs are made for 6 mm depron
Wing span: 73.5 cm (28.9 inches), 71.9 cm without wingtips (28.3 inches) | Length 102.5 cm (40.4 inches) | CoG location 14.6 cm (5.75 inches) forward of the vertical stabilizers | Fits propellers with a maximum diameter of 6 inches