Designed by Tomas Hellberg
If you download plans and build the Eurofighter, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
The Eurofighter Typhoon is a mid-mounted pusher model. It is intended to be flown with tailerons only, but I've also made markings for a rudder. Build it from the plans attached below.
You will have to mark out and cut the slot for the motor. The dimensions of the slots and tabs are made for 6 mm depron.
Wing span: 73 cm (29 inches) | Length: 101 cm (40 inches) | CoG location: 12 cm (4.75 inches) from wingbreak | Propeller slot: Fits propellers with a maximum diameter of 6 inches.
For more information, visit Tomas Hellberg's website.
Designed by Tomas Hellberg
If you download plans and build the Eurofighter, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
The Eurofighter Typhoon is a mid-mounted pusher model. It is intended to be flown with tailerons only, but I've also made markings for a rudder. Build it from the plans attached below.
You will have to mark out and cut the slot for the motor. The dimensions of the slots and tabs are made for 6 mm depron.
Wing span: 73 cm (29 inches) | Length: 101 cm (40 inches) | CoG location: 12 cm (4.75 inches) from wingbreak | Propeller slot: Fits propellers with a maximum diameter of 6 inches.
For more information, visit Tomas Hellberg's website.