- Parkjet Plans
- SU-31
SU-31
SU-31
Designed by Tomas Hellberg
If you download plans and build the SU-31, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
These are my plans for a simple profile SU-31 3D aerobatic model. This design features easy tabbed construction so it goes together quickly. This airplane is designed to be made out of 6mm Depron foam but lots of materials will work, you might just have to adjust the tabs.
Additionally, the slots for the motor mount may have to be adjusted, depending on which motor you choose to use.
I designed this model a little larger than my other models, so its certainly best flown outdoors. Also, the use of carbon rods and supports is recommended.
SPECIFICATIONS
Wing span: 105 cm (41 inches) | Length: 98 cm (39 inches) | CoG location: 5.7 cm (2.2 inches) behind wing leading edge.
BUILD THREAD
For more information, visit Tomas Hellberg's website.
Designed by Tomas Hellberg
If you download plans and build the SU-31, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
These are my plans for a simple profile SU-31 3D aerobatic model. This design features easy tabbed construction so it goes together quickly. This airplane is designed to be made out of 6mm Depron foam but lots of materials will work, you might just have to adjust the tabs.
Additionally, the slots for the motor mount may have to be adjusted, depending on which motor you choose to use.
I designed this model a little larger than my other models, so its certainly best flown outdoors. Also, the use of carbon rods and supports is recommended.
SPECIFICATIONS
Wing span: 105 cm (41 inches) | Length: 98 cm (39 inches) | CoG location: 5.7 cm (2.2 inches) behind wing leading edge.
BUILD THREAD
For more information, visit Tomas Hellberg's website.